NOTE: Orders are taking longer than normal due to Covid-19

News RSS

This is probably the number one tool we get questions about on The Fab Forums YouTube channel. The Cleco...this things come in different sizes and versions but they all do the same thing. They are designed to temporarily hold Sheetmetal together. Most of the time they are replaced by rivets or sheet metal screws during final assembly. The best part is that these things are very affordable. Cleco Kit - https://amzn.to/2R1eT9Y Cleco Clamps - https://amzn.to/2QYoZbF *As an Amazon Associate we earn from qualifying purchases*

Read more

You ever get tired of shaking paint cans? Lets be honest, we probably don't ever shake/mix paint in cans for as long as we should. For the average dollar store paint can that's probably not that big of a deal, but with the higher end two part paints that are offered today its important to get the two parts well mixed. Here is a tool that can help you with that. MixKwik Can Shaker - https://amzn.to/3v4N2nT *As an Amazon Associate I earn from qualifying purchases* This thing is actually quite simple. It just attaches to any reciprocating saw and holds the...

Read more

If you've ever worked with roll bar tubing or making stainless exhaust systems you know how hard it can be at times to get everything either prepped for welding or cleaned up after you finish. This tool is a beast when it comes to this very job. We like to mainly use it with the Scotch-Brite belts but it can also be used with different grit sanding belts. Exhaust, Induction, Chassis and Roll Bar setups... You need this tool !BlueRock Polisher - https://amzn.to/33B9ZD0 BlueRock Polisher Kit - https://amzn.to/2RckeLD Scotch-Brite Belts - https://amzn.to/2RdyPGD  *As an Amazon Associate I earn from qualifying...

Read more

Have you ever needed a "paint" that is as durable as powder coat but can be welded though and easily touched up? Well let me introduce you to Steel-It. Steel-It is a poly based paint with 100% stainless steel pigment. The stainless pigment make this product extremely durable and also make it able to be welded through. Steel-It is very popular in the trophy truck and off-road scene because of these properties. If you think this would work well for your current project we suggest you check it out. Black Steel-It - https://amzn.to/3tpyIon Gray Steel-It - https://amzn.to/3vMO0oR *As an Amazon...

Read more

Ok obvious this is just our opinion, and we may be a little biased because we use it all the time but... Sharkhide is hands down "the worlds best clear metal protectant" Sharkhide was originally designed for protecting aluminum on offshore boats but has quickly made its way into the automotive industry. Known to never chip, peel, crack, or yellow. It is excellent for those bare metal projects like rat rods and suspension pieces. Go check it out, you wont be disappointed. Sharkhide Can - https://amzn.to/2PTwvDZSharkhide Quart - https://amzn.to/3tj0gMg*As an Amazon Associate we earn from qualifying purchases*

Read more