NOTE: Orders are taking longer than normal due to Covid-19

News RSS

Have you ever needed a "paint" that is as durable as powder coat but can be welded though and easily touched up? Well let me introduce you to Steel-It. Steel-It is a poly based paint with 100% stainless steel pigment. The stainless pigment make this product extremely durable and also make it able to be welded through. Steel-It is very popular in the trophy truck and off-road scene because of these properties. If you think this would work well for your current project we suggest you check it out. Black Steel-It - https://amzn.to/3tpyIon Gray Steel-It - https://amzn.to/3vMO0oR *As an Amazon...

Read more

Ok obvious this is just our opinion, and we may be a little biased because we use it all the time but... Sharkhide is hands down "the worlds best clear metal protectant" Sharkhide was originally designed for protecting aluminum on offshore boats but has quickly made its way into the automotive industry. Known to never chip, peel, crack, or yellow. It is excellent for those bare metal projects like rat rods and suspension pieces. Go check it out, you wont be disappointed. Sharkhide Can - https://amzn.to/2PTwvDZSharkhide Quart - https://amzn.to/3tj0gMg*As an Amazon Associate we earn from qualifying purchases*

Read more

Have you ever had a piece of equipment that you wished you could turn on or off with your foot? I took a portable bandsaw and made it into a vertical bandsaw years ago using a clamp to turn the power on and off. Until I found this foot switch. Now I just walk up with the piece of material, step on the switch, cut material, and walk away. This is a tool that should be considered for any garage or shop. Foot Activated Power Switch - https://amzn.to/2Iw7fNH *As an Amazon Associate I earn from qualifying purchases*

Read more

So here is the deal. If you plan to do any sheet metal work you want to work smarter not harder. The best way to do that is to get a good pair of sheet metal shears. These things come in a range of flavors but we recommend going with the electric ones unless you just prefer air. These things work awesome and will cut the time down to a fraction of what it would have taken if you were using hand shears. Some of the shears we recommend here... Electric Metal Shear - https://amzn.to/3ehmA4L Electric Metal Shear - https://amzn.to/3tr2WaR Pneumatic Metal...

Read more

For most folks that are not in the fabrication industry the Cleco is a Mystery. Really the Cleco is a very simple yet most useful tool. Its basic function is to hold two pieces of material together through either a small 1/8 hole or clamp. It can do this with a simple spring and wedge functionality. In most cases the cleco is replaced later with a rivet during final assembly. The best thing about this tool is that the kits are not very expensive. You can check them out here: Standard Cleco Set - http://amzn.to/1QKMMDf Cleco Side Grip Clamps ½”...

Read more